Resealed erythrocytes have been explored in various dimensions of drug delivery, owing to their high biocompatibility and inability to initiate immune response. The present research was designed to evaluate the drug delivery potential of erythrocytes by loading a hydrophobic anti-malarial drug, Artemether. Three different loading techniques were applied to achieve maximum optimized drug loading. A HPLC method was validated for drug quantification in erythrocytes. The relatively high loading was achieved using hypotonic treatment was 31.39% as compared to other two methods. These, drug loaded erythrocytes were characterized for membrane integrity via ESR showing higher ESR values for drug loaded cells as compared to normal cells. Moreover, microscopic evaluation was done to observe morphological changes in erythrocytes after successful loading which showed swollen cells with slight rough surface as compared to smooth surface of normal cells. Drug release was studied for 8 h which showed more than 80% release within 3-7 h from erythrocytes treated with different hypotonic methods. Overall, the study revealed a potential application of erythrocytes in delivery of hydrophobic drugs using hypotonic treatment as compared to other methods.

Abstract INTRODUCTION: The behavior of methicillin-resistant Staphylococcus aureus (MRSA) isolated from central venous catheter-related infection was evaluated to determine its biofilm potential, antimicrobial resistance, and adhesion genes. METHODS: A total of 1,156 central venous catheters (CVC) were evaluated to screen for pathogens. Antimicrobial sensitivity, biofilm formation potential, and molecular analysis of MRSA were examined following standard guidelines. RESULTS: Of the 1,156 samples, 882 (76%) were colonized by bacteria or candida. Among the infected patients, 69% were male and 36% were female with median age of 32 years. Staphylococcus aureus infected 39% (344/882) of CVCs in patients. Of the 59% (208/344) of patients with MRSA, 57% had community acquired MRSA and 43% had hospital acquired MRSA. Linezolid and vancomycin killed 100% of MRSA; resistance levels to fusidic acid, doxycycline, clindamycin, azithromycin, amikacin, trimethoprim-sulfamethoxazole, gentamycin, tobramycin, and ofloxacin were 21%, 42%, 66%, 68%, 72%, 85%, 95%, 97%, and 98% respectively. Strong biofilm was produced by 23% of samples, moderate by 27%, and weak by 50% of MRSA. The presence of adhesion genes, sdrC and sdrD (90%), eno (87%), fnbA (80%), clfA and sdrE (67%), fnbB, sdrD (61%), and cna (51%), in most MRSA samples suggested that the adhesion genes are associated with biofilm synthesis. CONCLUSIONS: The superbug MRSA is a major cause of CVC-related infection. Antibiotic resistance to major classes of antibiotics and biofilm formation potential enhanced superbug MRSA virulence, leading to complicated infection. MRSA causes infection in hospitals, communities, and livestock.

Abstract INTRODUCTION: With the advancement of medicine and surgery, various types of medical devices have become part of treatment strategies. METHODS: Identification and antimicrobial sensitivity testing were done according to CLSI guidelines following standard microbiological practices. RESULTS: Urinary catheter infections (31%) were most frequent followed by central venous catheter (18%) and orthopedic implants (15%). Methicillin resistant Staphylococcus aureus (MRSA) was a major cause of device-related infection after Escherichia coli (21%); other pathogens were Klebsiella pneumoniae (14%), Pseudomonas spp. (10%), Acinetobacter spp. (8%) and Candida species (7%). None of MRSA was resistant to vancomycin (MIC ≥16µg/mL). Resistance rates were 98% and 97% for ofloxacin and ciprofloxacin, respectively. CONCLUSIONS Escherichia coli and MRSA are major pathogens of medical device-related infections.

Abstract: Introduction: The drug resistant Acinetobacter strains are important causes of nosocomial infections that are difficult to control and treat. This study aimed to determine the antimicrobial susceptibility patterns of Acinetobacter strains isolated from different clinical specimens obtained from patients belonging to different age groups. METHODS: In total, 716 non-duplicate Acinetobacter isolates were collected from the infected patients admitted to tertiary-care hospitals at Lahore, Pakistan, over a period of 28 months. The Acinetobacter isolates were identified using API 20E, and antimicrobial susceptibility testing was performed and interpreted according to Clinical and Laboratory Standards Institute (CLSI) guidelines. RESULTS: The isolation rate of Acinetobacter was high from the respiratory specimens, followed by wound samples. Antibiotic susceptibility analyses of the isolates revealed that the resistance to cefotaxime and ceftazidime was the most common, in 710 (99.2%) specimens each, followed by the resistance to gentamicin in 670 (93.6%) isolates, and to imipenem in 651 (90.9%) isolates. However, almost all isolates were susceptible to tigecycline, colistin, and polymyxin B. CONCLUSIONS: The present study showed the alarming trends of resistance of Acinetobacter strains isolated from clinical specimens to the various classes of antimicrobials. The improvement of microbiological techniques for earlier and more accurate identification of bacteria is necessary for the selection of appropriate treatments.

Abstract Pseudomonas aeruginosa, in spite of being a ubiquitous organism (as it is found in soil, water, and humans), is also an opportunistic pathogen. In order to maintain its diversity in the community, it produces various toxic proteins, known as, bacteriocins. In the present study, pyocin SA189, which is a bacteriocin produced by P. aeruginosa SA189 (isolated from a clinical sample) was characterized. P. aeruginosa SA189, as identified by the conventional and 16S rRNA gene amplification, produced pyocin SA189 of molecular weight of 66 k Da. The pyocin showed antimicrobial activity against several clinically relevant Gram-positive and Gram-negative bacteria and was substantially stable for wide ranges of temperature and pH. Furthermore, the pyocin also retained its biological activity upon treatment with metal ions, organic solvents, and various proteolytic and lipolytic enzymes. The data from the growth kinetics indicated that the maximum bacteriocin production occurred in the late log phase. Overall, our results signify the potential of pyocin SA189 as a bio-control agent.

Filamentous fungi are considered to be the most important group of microorganisms for the production of plant cell wall degrading enzymes (CWDE), in solid state fermentations. In this study, two fungal strains Aspergillus niger MS23 and Aspergillus terreus MS105 were screened for plant CWDE such as amylase, pectinase, xylanase and cellulases (β-glucosidase, endoglucanase and filterpaperase) using a novel substrate, Banana Peels (BP) for SSF process. This is the first study, to the best of our knowledge, to use BP as SSF substrate for plant CWDE production by co-culture of fungal strains. The titers of pectinase were significantly improved in co-culture compared to mono-culture. Furthermore, the enzyme preparations obtained from monoculture and co-culture were used to study the hydrolysis of BP along with some crude and purified substrates. It was observed that the enzymatic hydrolysis of different crude and purified substrates accomplished after 26 h of incubation, where pectin was maximally hydrolyzed by the enzyme preparations of mono and co-culture. Along with purified substrates, crude materials were also proved to be efficiently degraded by the cocktail of the CWDE. These results demonstrated that banana peels may be a potential substrate in solid-state fermentation for the production of plant cell wall degrading enzymes to be used for improving various biotechnological and industrial processes.

O objetivo do presente estudo foi formular comprimidos mucoadesivos de flurbiprofeno, de liberação controlada, e otimizar o perfil da liberação do fármaco e a bioadesão, utilizando a metodologia de superfície de resposta. Prepararam-se os comprimidos via técnica de compressão direta, que foram avaliados in vitro quanto aos parâmetros de dissolução e da força bioadesiva. Planejamento com componente central para dois fatores em cinco níveis cada foi empregado para esse estudo. Carbopol 934 e carboximetilcelulose sódica foram tomados como variáveis independentes. Efetuaram-se estudos de espectroscopia por transformada de Fourier (FTIR) para observar a estabilidade do fármaco durante a compressão direta e para avaliar a interação a fármaco-polímero. Aplicaram-se vários métodos cinéticos para avaliar a liberação do fármaco dos polímeros. Gráficos de superfície de contorno e de resposta foram efetuados para retratar a relação entre as variáveis dependentes e a resposta. Os comprimidos mucoadesivos de flurbiprofeno apresentaram cinética de liberação não-fickiana, estendendo para ordem zero, para algumas formulações (F3, F8 e F9), alcançando transporte super caso II, à medida que o valor do expoente (n) de taxa de liberação variou entre 0,584 e 1,104. Modelos matemáticos polinomiais, gerados por diversas variáveis de resposta, foram estatisticamente, significativos (P<0,05). O estudo também auxiliou a encontrar a formulação ótima do fármaco, com excelente força de bioadesão. Combinações adequadas dos dois polímeros resultaram em perfis de liberação adequado, sendo que o Carbopol 934 produziu mais adesão.

The objective of the current study was to formulate mucoadhesive controlled release matrix tablets of flurbiprofen and to optimize its drug release profile and bioadhesion using response surface methodology. Tablets were prepared via a direct compression technique and evaluated for in vitro dissolution parameters and bioadhesive strength. A central composite design for two factors at five levels each was employed for the study. Carbopol 934 and sodium carboxymethylcellulose were taken as independent variables. Fourier transform infrared (FTIR) spectroscopy studies were performed to observe the stability of the drug during direct compression and to check for a drug-polymer interaction. Various kinetic models were applied to evaluate drug release from the polymers. Contour and response surface plots were also drawn to portray the relationship between the independent and response variables. Mucoadhesive tablets of flurbiprofen exhibited non-Fickian drug release kinetics extending towards zero-order, with some formulations (F3, F8, and F9) reaching super case II transport, as the value of the release rate exponent (n) varied between 0.584 and 1.104. Polynomial mathematical models, generated for various response variables, were found to be statistically significant (P<0.05). The study also helped to find the drug's optimum formulation with excellent bioadhesive strength. Suitable combinations of two polymers provided adequate release profile, while carbopol 934 produced more bioadhesion.